Brokerage boats for sale in Lancashire, England
This is a stunning example of a Fisher 46, at the time of build they were the most luxurious of the Fisher range. This particular boat is hull no.11 and it is believed that Fairways Marine built her for the 1980 London Boatshow.
One of the standouts on this boat is the master suite with a central double berth and a settee down each side. To starboard there is a built in wardrobe and shelved cupboard space and to port there is an ensuite toilet and separate shower compartment.
The boat has had an extensive re-fit over the last 7 years and the hull has been totally refurbished with Jotun ...
read more
Year: | 1979 |
Length: |
14.020m |
Location: |
Lancashire UK |
Price: | £249,000 |
View Details |
This is a May 2019 bespoke build from XR&D Boat Builders. Built to a more traditional design with the sloping sides in the front section.
The boat is part completed and requires some internal finishing which is obvious from the pictures. The topsides will require stripping back and a new paint job. The hull was 2 Pac blacked from XR&D.
The boat will come with a new BSC
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Register with Boatshed to see 71 extra photos of this Narrowboat 60ft Trad Stern .
This Narrowboat 60ft Trad Stern ...
read more
Year: | 2019 |
Length: |
18.28m |
Location: |
Lancashire UK |
Price: | £59,950 |
View Details |
MasterCraft Brokerage!!
Looking to sell you MasterCraft Boat??? Have your boat perfectly positioned with MasterCraft Boats UK to achieve the best possible price and offer potential customers looking to purchase the best possible experience
MasterCraft Boats UK are the official UK distibutor and have continous requests from customer looking to purchase various models in the MasterCraft range. MasterCraft Brokerage enables you to pass over the responsibility of selling your boat to us. We will liaise and deal with potential customers, arrange viewings and meet with potential buyers, arran...
read more
Boatshed Lancashire are delighted to offer for sale this lovely 65ft x 12ft 2014 Widebeam built by Burscough Boats. The boat is presently owned by a children's charity and has been very lightly used. The boat is not getting enough use so they are now selling it.
The large cockpit area has fitted seating around the stern with plenty of cockpit lockers, gas locker, outside socket and has fitted steel side doors. She has wheel steering and also an emergency tiller if needed. Bowthruster controls, horn, tunnel light and bilge pump are all controlled at the helm position.
Moving down into the...
read more
Year: | 2014 |
Length: |
19.812m |
Location: |
Lancashire UK |
Price: | £125,000 |
View Details |
A unique Inland Waterways skippered canal cruises business operating on the Leeds & Liverpool Canal departing daily (9am to 3pm) from Burscough, near Ormskirk, north-west of Manchester. This is a delightful, wonderfully rural, and profitable lifestyle business that operates all year round.
It offers both half day and full day hospitality styled cruises, with a range of food and beverage services (fully licensed to serve alcoholic beverages) available including breakfast, afternoon tea and evening meals. Catering is provided by partner establishments, very charmingly, as an integral pa...
read more
This is another stunning build by the talented Jazzymaid team with their unique design ideas.
The cockpit has a lovely pram hood in black and there are lockers on either side of the companionway.
Entering through the rear companionway you arrive in the beautiful kitchen with plenty of smart, modern high gloss white units offering plenty of storage space, solid wood walnut varnished worktops , 3 burner range hob, oven & grill, combi microwave oven, washing machine, fridge, freezer, dishwasher, stainless steel sink with instant boiling water tap and a large solid wood breakfast bar with ...
read more
Year: | 2023 |
Length: |
18.288m |
Location: |
Lancashire UK |
Price: | £139,000 |
View Details |
Known for its starring role in Howards Way, the Spring 25 was one of the best things to come out of that programme. They are easy to handle and are extremely good off the wind in a blow, giving the impression of the handling characteristic of a much larger boat.
Down below in the main cabin she offers 2 small berths forward and 2 settee berths with a chart table and heads to starboard. There is a stern cabin to port with a large double berth. With her wing keel she can take the ground on drying moorings and allows the capability to explore small creeks etc. She was last out of the water in...
read more
Year: | 1986 |
Length: |
7.77m |
Location: |
Lancashire UK |
Price: | £6,995 |
View Details |
Tia Dreamaker is a 60' x 9' Slimline Wide beam with a Euro cruiser stern. One of the initial Pioneers from the range that was designed and built by Collingwood Boat Builders in 2016. A Canaline 52HP diesel engine provides the propulsion. She also benefits from a pair of 95KGF Vetus Bow Thrusters at the bow of the boat.
Entering from the Euro cruiser stern into the galley fitted with a sink, cupboards for storage, a separate hob, a Belling oven and grill, a built in microwave, a fridge and separate freezer, and a washer & drier. Onward into the saloon, there is a sofa, a Morso...
read more
Year: | 2016 |
Length: |
60' |
Location: |
Lancashire UK |
Price: | £119,950 Tax Paid |
View Details |
Annie Maud's onboard equipment and design make her ideal for
residential use or extended cruising. Built at an ideal length for cruising
the Leeds & Liverpool Canal and on through Yorkshire from where she
originated from at Legard Bridge Boat Co. Accommodation is for four, if
utilising the make-up double berth on the L-shape dinette. The saloon
has space for free-standing furniture of your choice, with a solid fuel
stove providing additional heat to the diesel central heating. The midships
galley is equipped with gas cooking, along with a microwave, and
a washing machine is ...
read more
Year: | 2002 |
Length: |
55' |
Location: |
Lancashire UK |
Price: | £62,000 |
View Details |
The whole of the interior has been built with maintenance in mind and can be disassembled.
Neil: 70 horse Mitsubishi S4E
Fork lift engine converted by SAB. Bottom end rebuilt, gearbox new bearings and seals. Alternator, starter, w/ pumps, injectors, all serviced. Rig has had about five years use. Main and Genoa were valeted and put away. The mizen is brand new, used once. There is a cruising chute. Internally she needs water tanks fitting and plumbing. Stern heads need finishing. Dog house needs bolting up and some canvas. INVENTORY
Sails:
Main – Stored in forepeak, repaired and ...
read more
Year: | 1975 |
Length: |
42' |
Location: |
Lancashire UK |
Price: | £20,000 |
View Details |